HOW CAN WE HELP?
Getting started with your device
Find product manuals
Need to return a recent order
Warranty and repair information
MOST FREQUENTLY ASKED QUESTIONS
We’ve include some of the the most common rangefinder questions we get asked below for quick reference.
Q: The display is out of focus?
A: Power the unit on by pressing the Power/Fire button once. Rotate the eyepiece in either direction until the display icons and numbers are in focus.
Q: My laser rangefinder seems to be off by 10 yards?
A: The LRF can be used to measure distance in yards or meters. The unit measure indicators are located in the lower right portion of the LCD. To select between yards and meters on your…
Pro XE: To select between yards and meters, press and hold the Mode button which is next to the Power button. Press the Power/Fire button to confirm your units preference and exit the Settings menu. The Pro Xe will return to the last unit of measure setting used each time the unit is turned on.
Tour V5 or V5 Shift: Press the button on the side marked Y/M. Press the top portion Y for yards or the bottom portion M for meters. The Tour V5 will return to the last unit of measure setting used each time the unit is turned on.
Hybrid: Starting with the unit powered off, press and hold the Power/Fire button. After 7 seconds, the display will begin to cycle through the options: Yards or meters. When the units you want are displayed, release the Power/Fire button to select it. Y for Yards or M for Meters. The Hybrid will return to the last unit of measure setting used each time the unit is turned on.
Q: ls it safe to clean my laser rangefinder?
A: Yes, follow these steps for proper cleaning:
1. Blow away any excessive dust or debris on exterior (or use a soft brush).
2. To remove dirt or fingerprints, clean with the supplied microfiber cloth rubbing in a circular motion. Use of a coarse cloth or unnecessary rubbing may scratch the lens surface and eventually cause permanent damage. The included washable microfiber cleaning cloth is ideal for the routine cleaning of your optics. Simply breathe lightly on the lens to provide a slight amount of moisture, then gently rub the lens with the microfiber cloth.
3. For a more thorough cleaning, photographic lens tissue and photographic-type lens cleaning fluid or isopropyl alcohol may be used. Always apply fluid to the cleaning cloth – never directly on the lens.
Q: When do l replace the battery?
A: Replace the battery when the unit does not turn on, display does not illuminate, or the display goes blank when attempting to power the laser. Use a good quality 3 -volt lithium battery (CR2). Insert into the compartment with the negative (flat) end first (positive end facing out towards the battery cover). We recommend replacing the battery at least once every six months.
Note: You can replace the CR2 battery that powers the laser part of the Hybrid but you cannot replace the Lithium Ion that powers the GPS part of the Hybrid, as it is built into the device.
